Ferroalloy
Ferroalloy is composed of less than 50% iron and one or more elements, primarily used for producing steel. The chemical composition and lumpiness of individual ferroalloys are indicative and can be adjusted or specified according to customer requirements.
Product Forms:
Ferroalloy is commonly delivered loosely or in big bags or barrels.
Lumpiness:
0–3 mm, 3–10 mm, 0–10 mm, 5–50 mm, 10–50mm, 10–80 mm, 50–100 mm, 50–150 mm
| Mn min % | Si max % | C % | P max % | S max % | |
| FeMnHC | 76 | 2.00 | 6-8 | 0.25 | 0.03 |
| FeMnHC | 76 | 2.00 | 6-8 | 0.35 | 0.03 |
| FeMnHC | 78 | 1.00 | max 1.50 (1.00) | 0.20 | 0.03 |
| FeMnHc | 80 | 0.60 | max 1 | 0.20 | 0.50 |
| Mn min % | Si max % | C max % | P max % | S max % | |
| FeSiMn | 65 | 16 – 20 | 1-2 | 0.20 (0.35) | 0.03 |
| FeSiMn | 69 | 16 - 20 | 1-2 | 0.20 (0.35) | 0.03 |
| Mo min % | C max % | Si max % | Cu max % | P max % | S max % | |
| FeMo 60% | 60 | 0.10 | 1.50 | 0.50 | 0.05 | 0.10 |
| FeMo 65% | 65 | 0.10 | 0.80 | 0.50 | 0.05 | 0.10 |
| V min % | Al max % | Si max % | Mn max % | P max % | S max % | |
| FeV 80% | 78 | 1.50 | 1.50 | 1.50 | 0.06 | 0.05 |
| Cr min % | C max % | Si max % | Al max % | P max % | S max % | |
| FeCr010 | 65 | 0.10 | 1.00 | 0.50 | 0.03 | 0.03 |
| FeCr015 | 65 | 0.15 | 1.00 | 0.50 | 0.03 | 0.03 |
| FeCr025 | 65 | 0.25 | 1.00 | 0.50 | 0.03 | 0.03 |
| FeCr800 | 65 | 6.00 – 9.00 | 2.00 (1.00) | - | 0.03 | 0.03 |
| Nb min % | Al max % | Si max % | C max % | P max % | S max % | |
| FeNb 65% | 63 – 68 | 2.00 | 2.50 | 0.50 | 0.10 | 0.10 |
| Si max % | Cu max % | Mg max % | Zn max % | Pb max % | Sn max % | Al min % | |
| Al ingoty | 5.00 | 4.00 | 4.50 | 3.50 | 0.50 | 0.50 | 94 |
| Al granule | 1.00 | 1.00 | 1.00 | 96 | |||
| Al pyramidy | 5.00 | 4.00 | 4.50 | 3.50 | 0.50 | 0.50 | 94 |
| KUSOVOST | Ni min % | BALENÍ | |
| Nikl | stříhaný/katody - 100 x 100 mm / nestříhaný | 99.93 | Big bagy, svazky na paletě, sudy |
- 01